Here is a sampling of our ski and snowboard repair and service offerings. We use Swix premium tuning products exclusively. |
---|
|
Alpine, A/T and Telemark Ski Service |
---|
Alpine Mount | Alpine and Tele ski binding installation * Add $10 for re-mounting | $60 |
Used binding install | Alpine and Tele ski used binding installation | $70 |
Alpine Binding System Check | All binding components are cleaned and inspected for best performance. Bindings are adjusted by a manufacturer certified binding technician. Function test is performed with calibration of release/retention settings. Both boots required.** | $35 |
Ceramic Edge | Ski/Board edges are set, then sharpened and polished using our TrimJet Ceramic Edge Machine | $25 |
Infrared Hot Wax | Hot wax of your Ski/Board using our Wax Future Infrared Machine with temperature specific Swix Wax. | $25 |
Ceramic Edge and Infrared Hot Wax | Ski/Board Edges are set, sharpened and polished and then your base hot waxed with a Universal Wax. | $35 |
Buff Wax | Universal wax applied using our Wax Jet roller | $15 |
Junior Tune (Less than 120cm) | Belt grind, rough edge, and buff wax. | $25 |
Basic Tune | Belt grind, rough edge, and buff wax. | $40 |
Standard Tune | Stone Grind to add base structure, Ceramic Edge, Infrared Hot Wax with Universal Wax P-tex / base repairs minimum $15 additional. | $60
|
Premium Tune | Stone Grind to add base structure, Ceramic Edge, Infrared Hot Wax with temp specific Swix Wax, and Small Base Repairs | $80
|
Elite Tune
| Removal and sanding of sidewall, shaping of tips and tails, stone grinding, set the edge bevel on base and on side, hand polish all edges. * Any of the above can be priced separately starting at $15 per service. | $100
|
| * Specific edge angles/bevels can be done upon request * A la Carte options are available, based on $70/hour labor * Base Repair is available at $10 and up | |
|
Snowboard Service |
---|
Basic Tune | Belt grind, rough edge, and buff wax. | $40 |
Standard Tune | Stonegrind base structure. Ceramic disc edge finish. Infrared Waxing. P-tex / base repairs minimum $10 additional. | $60
|
Premium Tune | Fresh Stonegrind base structure, ceramic disc edge finish, minor base fills included (major P-Tex/Base repairs minimum $15 additional.), two stage Infrared hot wax using premium Swix CH and LF waxes for snow temperature specific conditions. | $80
|
Elite Tune
| Removal and sanding of sidewall, shaping of tips and tails, stone grinding, set the edge bevel on base and on side, hand polish all edges. * Any of the above can be priced separately starting at $15 per service. | $100
|
| * Specific edge angles/bevels can be done upon request * A la Carte options are available, based on $70/hour labor * Base Repair is available at $10 and up | |
|
Nordic Skis, Nordic Skates and Roller Ski Service |
---|
Tour/Race Mount* | Mounting of NNN, Profil or Pilot bindings. Boot Size Required. | $30 |
3-pin Mount* | 3-pin 75mm bindings with a separate heel piece. Both boots needed for mounting.*** | $30 |
3-pin cable Mount* | As above but with a cable. Includes sizing cable and initial tension adjustment. | $40 |
Telemark Releasable Binding Mount* | Includes all releasable telemark binding setups - with DIN. | $60 |
Base Prep | A thorough cleaning of the ski base and a coat of base or temperature specific wax. | $30 |
Wood Base Prep | Pine tar and wax for your all wood skis | $30 |
Basic Base Wax Saturation | Base cleaning. Soft CH wax using infared waxing technology. | $25 |
Basic Base Wax Saturation plus Hardener | Base cleaning. Soft CH wax using infared waxing technology plus hardener. | $45
|
Nordic Stone Grind with the Wintersteiger Omega SBI | Bases stone ground flat with structure. Includes infrared Swix CH11 wax. | $69.95
|
Ultra Base/Race Prep | Includes wax/snow specific stone-grind structure, double hotbox waxing with premium Swix LF waxes, hand finished and ready to race. | $95
|
|
Roller Ski Tire / Tube Install | Flat Repair | $30 |
Roller Ski Mount | Boot size required | $35 |
|
*In the case of a remount (moving or replacing a binding), add $10-$20 to the normal mounting charge for binding removal, cleanup, and hole plugs. |
|
**Use and/or storage can effect the adjustment of releasable bindings. Therefore, it is a good idea to have the your bindings adjusted annually. Both boots required. |
|
***Both boots are needed for the proper mounting of all 3-pin/75mm bindings. |