Marie-France Roy brings you her best with the new version of the Arbor Veda Camber Snowboard. This freeride women's stick incorporates Arbor's new fender design, which provides increased float in good snow and more powerful turn initiation and drive with increased edge hold when things get firm out there. The lightly tapered outline makes for a quick-edging board that is as aggressive without feeling overpowering. A little more directional and a little bit stiffer than similar boards- think more freeride and off piste capable versus an all-around resort rider. Marie made sure her board is as environmentally friendly as possible.
Flex Rating (1 = soft, 10 = most responsive)
Freeride, All-Mountain, Big-Mountain, Powder
Camber / Rocker Style
Arbor Camber System
The Camber System design offers a poppy ride with crisp, fully engaged performance.
The System is Arbor's principal design platform. Arbor developed The System to improve true rocker and camber designs by maintaining the integrity of both platforms without fusing either into a hybrid design. Their belief is that hybridization sacrifices some of the inherent benefits of each design philosophy. The System is an advanced rocker and camber design that improves upon the benefits of each platform depending on the needs of each rider. Whether you prefer the crisp, fully engaged performance of camber or the surfy, butter feel of rocker, The System creates a clean, effective connection to the snow, delivering a smooth ride with enhanced control.
The System is a blending of two technologies: Grip Tech and Parabolic Profiling.
Grip Tech is a tri-radial sidecut design that is not "blended." Natural shaping intersections, that in the past were eliminated, have been transformed into heel and toe contact points that provide a direct, more ergonomic way to grip the snow when additional control is needed. The extra contacts also form pivot zones that make turning easier and more natural. Grip Tech effectively moves a board's primary interface with the snow underfoot, allowing for designs that don't lose performance as they lift leading sections of the effective edge from the snow for a less grabby ride. Those designs include rocker, or camber with the new Uprise Fenders. Uprise Fenders pull the outside contact zones off the snow with angled 3º risers on all Camber System designs.
The System utilizes rocker or camber profiles created using the parabolic arc, which progressively reduces the amount of rocker or camber toward the tip and tail of a snowboard. This creates low, more effective profiles. On Arbor Rocker System designs, parabolic profiling ensures the outside contact points are close enough to the snow to engage when maximum performance is required- higher speeds, fully loaded turns, and bigger landings. On Camber System designs, this guarantees the outside contact points do not dig too far into the snow, creating a cleaner, less catchy performance that makes it easier to turn, spin, and ride fast.
.8 cm Taper
A shaping technique that narrows the profile of the snowboard towards the rear contact points. Tapered snowboards will have a wider nose and narrower tail, allowing the tail of the board to sink in deeper snow creating natural float and cleaner tracking.
FSC Certified Highland II Core
A newly developed screening process has allowed us to hand select the very lightest and highest quality paulownia from Arbor's sourcing partners. The result is a lighter, more responsive version of the FSC Certified Highland Core known for highly reliable return and long-lasting durability.
Hand Dyed Ash Powerply
Arbor signature Powerply topsheets are made with a sustainably sourced wood or bamboo topsheet. The natural grain creates the style Arbor has been known for since they launched in 1995. Less recognized is how the technology improves the strength, durability, and return of these snowboards. The Power Ply works like an added layer of fiberglass. During construction, the natural wood or bamboo fibers are turned into a composite layer inside the board, but the process takes time. They start with a log that must be soaked so that it can be sliced or "veneered" into sheets, which are then assembled into "faces". The "faces" are then backed with a special fleece material, precision sanded, and pre-laminated to a protective foil made in part from natural castor bean oil. The finished topsheet is at last ready to be built into a snowboard. In the end, the process makes Arbor Power Ply designs the most labor-intensive snowboards on the market. The resulting performance, board life, finish quality, reduced reliance on man-made glues, coatings, and composites are worth the extra effort.
R.A.P. Topless Technologies
A build process in which Arbor eliminates the need for a Bio-Plastic Topsheet, creating a lighter, more eco-friendly ride.
A triax over biax lay-up that's best for versatility: pow, backcountry, groomers, jumps, and more.
Entropy Bio Resin
Starting with the 2020 line Arbor is proud to announce that all Powerplys and R.A.P. Topless Tech veneers will be made with Entropy Bio-Resin, a replacement for traditional petroleum based resin that doesn't affect performance or usability. The ingredients that go into Entropy Bio-Resin are sourced as co-products or waste products of other industrial processes and are manufactured employing green chemistry techniques that reduce the carbon footprint of the material by up to 40% (when compared to its petroleum based equivalent).
360 Degree Fully Wrapped Sidewalls
A 360-degree, fully wrapped sidewall that eliminates the need for tip fill, while effectively tying the whole snowboard together. A technology that delivers incredibly tight tolerances for improved board life and durability.
Recycled Steel Edges
Arbor's highly durable, recycled steed edges embody two of Arbor's key values: quality and sustainability.
1.5° Uprise Fenders
Three Year Warranty
A higher molecular weight, sintered base that provides added durability and speed.
Wend Natural Wax
All Arbor snowboards hit the shop floor ready to ride with Wend Natural Wax.
Arbor detunes the tip and tail contact points on all of their snowboards for a catch-free ride before they leave the factory.
Binding Mounting System
2x4 14 Pack Inserts
Be the first to review this product
Write Your Own Review
No questions yet. Be the first to ask the question!
Due to dealer agreements, we currently only ship to addresses in the United States. Due to COVID-19, shipping times are not guaranteed and delays are to be expected.
Skirack currently ships items to all 48 contiguous states, Alaska, and Hawaii, and Puerto Rico. We also ship to Military
APO / FPO addresses.
If your order meets or exceeds the amount advertised on the website, you qualify for free shipping. Choose the FREE delivery option (up to 10 business days) at checkout. This offer is valid for orders shipped to addresses in the 48 contiguous United States. The Free shipping option is not valid for orders shipped to Alaska, Hawaii, Puerto Rico, or anywhere else outside of the lower 48 states. Free shipping orders will be shipped by the most appropriate method based on their physical size and destination. Some items such as bicycles are not available to be shipped and are only available to be picked up in our Burlington, Vermont store.
2-Day Delivery to Alaska and Hawaii may take three days. Next-Day Delivery is available only in the continental US. Next-Day Delivery to Alaska and Hawaii may take an additional 1-2 days.
All shipping methods do not deliver on weekends, but on business days (Mon-Fri).
We currently do not ship to International addresses.
Approximate number of business days in transit for UPS Ground service originating from Burlington, VT.
Orders are shipped during normal business hours, Monday-Friday, excluding federal holidays within the United States.
Skirack and its shipping carriers will not be shipping or delivering on:
New Year's Eve - Only Air and International packages will be delivered
New Year's Day
Day after Thanksgiving - Only Air and International packages will be delivered
Additional Shipping Holidays for those with PO/APO and FPO addresses:
Martin Luther King, Jr. Day
The shipping costs are calculated at checkout based on the total weight of the order and destination. and will automatically compute on the Shopping Cart page.
Our store only displays items we have in stock, so back orders should not be an issue. If for some reason, you happen to order something that is not in stock, the item will be back ordered and you will be notified as soon as possible.
Please email email@example.com or call Skirack at (802) 658-3313 or (800) 882-4530 if you have any questions.